Kaboom Continuous Clean Toilet Cleaning System
Our Continuous Clean system transforms routine toilet maintenance into a hands-free experience. The in-tank device releases blue cleaning solution with every flush, working between your regular deep cleans to prevent ring buildup and keep bowls fresh. Each refill cartridge lasts up to three months in a standard household toilet.
The Continuous Clean dispenser attaches to the inside wall of your toilet tank using the included adhesive strip and mounting clip. Position the unit so the dispensing chamber sits below the waterline when the tank is full—this ensures proper solution release with each flush cycle.
How the Kaboom Continuous Clean Cartridge Works
Each flush cycle draws fresh water through the dispensing chamber, dissolving a measured amount of cleaning concentrate from the cartridge. The blue solution mixes with bowl water during the flush, coating surfaces as water levels drop and refill. This regular exposure prevents mineral deposits and organic stains from taking hold between your scheduled scrub sessions.
Cartridge lifespan depends on household flush frequency. A family of four typically sees three months per refill, while smaller households may extend that to four months. The blue tint fades as the cartridge depletes—when flushes run clear, it’s time to swap in a fresh replacement cartridge and restore the cleaning cycle.
What’s Included in the Starter Kit
Your first purchase includes the reusable dispenser housing, one cleaning cartridge, adhesive mounting strip, and installation instructions. The dispenser itself never needs replacement—only the cartridges require periodic swaps as they deplete.
Refill cartridges are sold separately in two-count packs, giving you six months of continuous cleaning per package. We designed the cartridge swap process to take under thirty seconds: lift the dispenser lid, pull the spent cartridge straight up, and press the new one down until it clicks into the housing slots.
How Continuous Clean Works
Complete Your Toilet Cleaning Routine
Customer reviews
Questions About the Continuous Clean System
Cartridge lifespan averages three months in a household with typical flush frequency—usually 15 to 25 flushes per day. Larger families or high-traffic bathrooms may see closer to two months per cartridge, while single-person households can extend that to four months. The blue indicator dye fades as the cartridge depletes, giving you a visual cue to install a replacement before the solution runs out completely.
Our dispenser works with most standard two-piece toilets manufactured after 1994 that have separate tanks. The unit requires at least five inches of clearance between your fill valve and the tank wall, plus sufficient depth for the 4.5-inch dispenser to sit below the waterline when the tank is full. One-piece toilets and pressure-assist models may have compatibility limitations due to their compact tank designs.
Yes, the kaboom continuous clean system complements manual cleaning rather than replacing it entirely. We recommend scheduling a full scrub with your preferred bowl cleaner every two to three weeks even with the automated system running. Avoid using drop-in tank tablets simultaneously, as the combined chemical load can damage tank components and isn’t necessary with the dispenser already providing daily treatment.
The Continuous Clean formula is septic-safe when used according to package directions. The measured dispensing rate releases cleaning concentrate gradually, preventing the chemical overload that can disrupt bacterial digestion in septic tanks. We’ve designed the solution to break down naturally without accumulating in your system or interfering with normal septic function.
First check whether your cartridge has depleted—flushes run clear when the cleaning concentrate is exhausted. If the cartridge still feels heavy and the dye chamber looks full, verify the dispenser hasn’t shifted out of position. The chamber bottom must sit below the waterline when the tank is full for proper solution release. You can also remove and reseat the cartridge to ensure it’s clicked fully into the dispensing slots.
No tools are required. The system installs using the included adhesive mounting strip and clip hardware. Simply clean the tank wall where you’ll place the dispenser, peel the adhesive backing, and press the unit firmly into position below the waterline. Insert your first cartridge, close the lid, and flush once to confirm solution is dispensing. The entire process typically takes under five minutes.
Lift the tank lid and open the dispenser top. Grasp the spent cartridge and pull straight up to remove it from the housing. Unwrap a fresh cartridge from its protective seal, align it over the dispensing slots, and press down until you hear a click confirming it’s seated. Close the dispenser lid and flush once to start the new cleaning cycle. The swap takes about thirty seconds with no tools needed.