X-All Foam Cleaner — Multi-Surface Foaming Action
X-All Foam is our go-to foaming cleaner for kitchens, bathrooms, and high-traffic surfaces. The thick foam clings to walls, tile, and tubs so the active oxygen cleaners can break down soap scum, grease, and everyday grime without constant scrubbing. We designed it to work on contact — spray, wait a few minutes, then wipe clean.
Our x-all foam uses oxygen-activated surfactants that release micro-bubbles on contact with organic stains. The foam structure itself is key — it holds the cleaning agents against vertical surfaces long enough for chemical bonds to break down soap film and grease molecules. Traditional liquid cleaners run off before they can penetrate buildup; foam stays put.
Application & Surface Coverage
Shake the can for five seconds before each use to ensure propellant and cleaning agents are fully mixed. Hold the nozzle six to eight inches from the surface and apply in overlapping sweeps — you want continuous foam coverage with no dry gaps. For large shower enclosures, work top to bottom in sections so you can wipe one area while the next is dwelling.
One 16-ounce can typically covers 30 square feet of flat tile or 25 square feet of textured surfaces like river-rock shower floors. If you’re cleaning grout lines, expect slightly higher usage since foam settles into crevices. We recommend starting with a test spray in an inconspicuous corner to confirm compatibility — while X-All Foam is safe for most sealed surfaces, unsealed natural stone and unfinished wood should be cleaned with pH-neutral products instead.
Care & Safety Guidelines
Store the aerosol can upright in a cool, dry location away from direct sunlight and heat sources above 120°F. Pressurized containers can rupture if exposed to high temperatures, so avoid leaving X-All Foam in hot vehicles or near radiators. Keep out of reach of children and pets.
Wear household gloves if you have sensitive skin — the oxygen cleaners are mild but prolonged contact can cause dryness. Ensure adequate ventilation when cleaning enclosed bathrooms; open a window or run the exhaust fan. Do not mix X-All Foam with bleach, ammonia, or other household chemicals — oxygen cleaners can react unpredictably with chlorine-based products.
What makes X-All Foam work
Other Kaboom Foam & Bathroom Cleaners
Customer reviews
X-All Foam Cleaner Questions
For everyday dirt and light soap film, 30 to 60 seconds of dwell time is enough. Heavier buildup like baked-on grease or thick soap scum may need two to three minutes. You’ll see the foam start to break down the stain — it often changes color slightly as it lifts grime. Avoid letting it dry completely on the surface; if it starts to set, mist lightly with water before wiping.
X-All Foam is safe for sealed granite, marble, and other natural stone. If your stone is unsealed or you’re unsure of the sealant condition, test in a small hidden area first. The oxygen cleaners are pH-balanced and won’t etch sealed surfaces, but unsealed stone can absorb moisture and stain. For daily care of unsealed stone, we recommend a pH-neutral stone cleaner instead.
Yes, the steel can is recyclable once fully depressurized. Spray outdoors until no product comes out, then check your local recycling guidelines — most curbside programs accept empty aerosol containers. Do not puncture or incinerate the can. Our propellant system contains no ozone-depleting compounds and the formula inside is biodegradable under wastewater treatment.
X-All Foam can remove light surface mildew and prevent new growth by eliminating the soap residue mold feeds on. For established black mold stains on grout or caulk, you’ll get better results with a dedicated mold remover that includes bleach or specialized biocides. Use X-All Foam for regular maintenance cleaning to keep mildew from taking hold in the first place.
Do not use X-All Foam on unsealed wood, unfinished metal, or painted surfaces that aren’t specifically labeled as washable. Avoid contact with fabric, carpet, or upholstery — the foam can leave water spots or discoloration. It’s designed for hard non-porous surfaces like tile, porcelain, glass, stainless steel, and sealed stone. Always test in an inconspicuous spot if you’re uncertain about a surface.
Never mix X-All Foam with bleach, ammonia, or other household cleaners. Oxygen-based formulas can react with chlorine bleach to produce harmful gases. If you’ve recently used a bleach product on a surface, rinse thoroughly with water and let it dry before applying X-All Foam. For best results, use our foam cleaners as standalone products without layering or combining.
A 16-ounce can covers approximately 30 square feet of smooth tile or glass, and about 25 square feet of textured or porous surfaces like river-rock shower floors. Actual coverage depends on foam thickness — a light misting uses less product than a thick blanket application. For routine cleaning, one can typically lasts two to three weeks in an average-sized bathroom with twice-weekly use.